■Heat Up Time：Max 90sec
■Steamer Capacity：About 28g/min
■Power Plug：for choice
■Certificates：ETL, PSE, VDE
1.Water injection operation:
Rotate the upper head clockwise to the point where the lock is aligned with the convex point. Lift the cover upwards to fill the water. The water level should not be lower than MIN and exceed the MAX water level. (Only pure water can be injected)
2. Product working status:
After the power turned on, the switch indicator light will be on. The water will boil in 70s. The water will generate steam in 90s. It can be used. After 8min, the steam will be finished. When operating, the tilt should not be less than 45°.
3. Protection function:
When the temperature exceeds the range of the thermostat, it will automatically protect and continue to work when the temperature drops.
4. Special features:
When the product is not dry with water, it will stop working in about 30 seconds and be automatically protected.
Test voltage and rated power